Numark X2 Manuel D'utilisation Du Propriétaire page 8

1. Play/Pause Button – Starts and stops playback and the platter. Pressing toggles between play
and pause of the platter. Each time Play is pressed after Pause, a new Cue Point is set.
PLEASE NOTE: Some features, such as looping, cue point, bleep and scratch mode functionality, will
Press "PLAY"
or "SUTTER"
2. Vinyl Record – controls the playback of the music, including scratching, pitch bend and cueing.
3. Locking Spindle – controls the cd player when the vinyl control record is fastened securely to it.
4. High Torque Direct Drive Platter - utilizes a 4.3 kgf-cm motor to turn the vinyl record. The
platter should not be held in position for sustained periods.
5. Slot Load CDRW Drive (on side) – designed to play commercially available CD and properly
burned CDR and CDRW discs. Insert the CDs you wish to play here.
6. Tonearm Assembly – please see "Tonearm Parts" section.
7. Startup Adjust - changes the amount of time it takes for the platter to start when the Play button
is activated. As the knob is turned to the right, the startup time decreases. For fast startup, turn
the knob all the way left.
Top Panel Features
only apply when using the X2 to play CD media.
Press Press "PLAY"
"PAUSE" or "SUTTER"
Play interval
Back to new cue point
Press "CUE"
Position on disc
Play interval
6