Publicité
Connectivity
tions included with Bosch connectivity module.
Operating instructions for connectivity module include
important information not covered in this manual.
This power tool is Bluetooth capable and select fea-
tures can be adjusted remotely using a mobile device.
Utilizing these features requires installation of a Bosch
Bluetooth connectivity module and a mobile device with
the Bosch Toolbox app installed.
If connectivity module is not purchased with the tool,
or if the replacement of the module or the battery
becomes necessary, please follow this procedure (See
Fig. 31):
-
Tilt the head assembly to the left to simplify the pro-
cess.
Using a flat screwdriver or a coin, remove the cover
–
A from the connectivity module compartment 31
located side of the side of handle 3, by turning it 1/4
turn counter-clockwise.
-
If the tool is already equipped with the connectivity
module, remove the battery B, but do not remove
the connectivity module C.
-
If the connectivity module is installed for the first
time, remove the plastic placeholder D from the
connectivity module compartment, and place the
connectivity module C in the compartment observ-
ing correct orientation. Note: Store the placeholder
D in a safe place. Reinsert the placeholder again if
the connectivity module is removed.
-
Next place new battery B on the top of the connec-
tivity module with the "+" polarity facing up .
-
Place the cover A over the battery and turn it 1/4-
turn clockwise to lock using a flat screwdriver or a
coin.
USING THE 'BOSCH TOOLBOX' APP
The 'Bosch Toolbox' app can be downloaded from the
App Store or Google Play.
Install the 'Bosch Toolbox' app on your mobile device or
make sure you are running the latest version of the app.
Launch the 'Bosch Toolbox' app on your mobile device
and click on "My Tools" icon/tile. Follow the app direc-
tions to pair the tool with the mobile device.
2610070552 _GCM18V-12GDC_20240712.indd 35
2610070552 _GCM18V-12GDC_20240712.indd 35
Preparing for Saw Operations
To reduce the risk of injury
read the operating instruc-
Fig. 31
D
31
3
BENEFITS SUMMARY OF CONNECTIVITY
MODULE AND APP
When used with the connectivity module, the 'Bosch
Toolbox' app will allow for the following with the tool:
–
Registration and personalisation
–
Status check and warning messages
–
General information and settings
–
Adjusting the speed levels
The help button on the app explains the features
of the app.
The info button on the app displays tool informa-
tion and specifications.
The alerts button displays any alerts received
from the tool.
A
B
C
35
8/27/2024 9:32:02 AM
8/27/2024 9:32:02 AM
Publicité
