Publicité
Part 4
ACCESSORIES INSTALLATION
Stacking Kit Installation Instructions
To ensure safe and secure installation, please
observe the instructions below.
!
WARNING!
Incorrect Installation can cause serious
accidents.
The weight of the dryer and the height of
installation makes the stacking procedure
too risky for one person. This procedure
should be performed by 2 or more
experienced service personnel.
1
Place washer firmly on a stable, even and
solid floor.
2
Peel protective paper off the tape from the
stacking kit side bracket.
3
Fit the stacking kit side bracket firmly to the
side of top plate by attaching the double-
sided tape to top plate as picture shows.
Note
If there are some foreign objects on the surface
of top plate, it becomes difficult to apply double-
sided tape on.
4
5
Stacking kit
6
7
• Do not use stacking kit with a gas dryer in
potentially unstable conditions like a mobile
home.
Secure stacking kit side bracket to the
washer with a screw on the back of bracket.
Repeat Steps 2, 3, 4 for the other side.
Place the dryer on top of the washer by fitting
legs as shown in the picture. Avoid finger
injuries - be careful not to pinch fingers
between the washer and dryer. Slide dryer
slowly backwards to the stopper of kit.
Insert the front stacking kit. Push the front
stacking kit back to the stoppers of side
stacking kit.
Screw both sides of the front kit.
1 3
Publicité
