Publicité
（DIS)ASSEMBLING THE WHEELS
Lift the trailer and place the axle in the appropriated location.The safety hook will
make sure the wheel remains securely attached.When both wheels are attached we
advise you to push both in order to make sure they don't move.
Remark: Regularly check the tire pressure!
To remove the wheels lift the trailer and remove the safety hook.
REMARK: When the wheels are not properly attached it's possible that one or both wheels release with a
crash as result.
WARNINGS!
For easy towing and safe handling, check tires often for proper inflation and
wear. Check tire pressure regularly.Always maintain the tires within pressure
range indicated on tire sidewall.
WARNINGS!
Never use the vehicle at night without adequate lighting and reflectors, obey all local laws
for lighting and reflectors in accordance with CPSC requirements. In order to meet CPSC
Safety Standards, a reflector must be in place on the tear of the trailer.
INSERTING AND REMOVING THE FLAG
Assemble the two sections of the flag pole together. Insert the flagpole into the
sewn sleeveon the left rear corner of the trailer.
CAUTION!
Always use the safety flag to maximize your visibility to other vehicles
sharing the road or path.
9
Publicité
