Publicité
ATTACHING AND REMOVING THE TOP COVER
Position the top cover over top of the trailer so that the roll-up window with bug
mesh screen is to the front of trailer. Feed the cover over the push-bar post holes
so they protrude through. Fasten the rear of cover with Zipper/Velcro strap and the
bottom corners of the cover with Velcro and stretch it until it is fully covering the
trailer.
Reverse the instructions to remove the top cover.
The top cover is designed to keep passengers and cargo dry and warm in
inclement weather and protects from flying debris. The rain PVC cover can be rolled
up to allow for added ventilation in hot weather or rolled down to allow for added
warm protection in the cold weather. Velcro closures keep the rain cover out of the
way when rolled up.
CAUTION!
It is strongly recommended that children's eyes are protected from flying
insects and airborne particles when using trailer. For protection, ensure that
the insect screen or the clear window is closed when using.
WARNINGS!
Passengers can become hot inside fully closed trailer during very hot
weather or when parked. Please make sure to open roll up top cover vents to
prevent overheating.
Position of the child(ren) in the trailer
When you place the children in the seat or remove the children from the seat,
always check that the trailer is securely connected with the bike and the bike is
properly parked. Always put on all brakes when loading or unloading.
Open the front of top cover and place the children in the proper position and close
the top cover. Make sure to use the seat belts and shoulder straps and wear
helmets.
The harness system is designed to keep your passengers immobilized and secure
during transport. The harness is designed to accommodate one or two children.
7
Publicité
