Publicité
WARNINGS!
The trailer/jogger/stroller is not suitable for running or skating. Any load
attached to push bar affects the stability of the vehicle. Before using as a
trailer, the wheel assembly should be removed.
USING THE STAMP BRAKES
The jogger/stroller is equipped with a hand brake to slow down the speed and to
park the vehicle.
The push bar is equipped with a locking clip for enhanced parking performance.
Pull back and engage the stamp brakes and clip the hook onto brake bar to lock the
stamp brakes in place.
Gently push on the vehicle to ensure the parking devices are engaged before
loading or unloading passenger or cargo.
The brake cables may have weak tension and the brake can not properly work. It
should need a fine-tuning on the tension nuts.
red tension nuts. Adjust the opposite tension nuts by turning down to proper position
and
then turning up the upper nut to fix the red nut. When completed, test the stamp
brakes to ensure it work properly before using.
Brake clip
-------------------------
WARNINGS!
The parking performance will be affected by low tire pressure and weak cable
tension. Always check the tire pressure regularly and inflate to the range
indicated on the tire sidewall for proper parking performance. Always check
and adjust the tension of brake cables for proper braking performance.
All parking devices shall be engaged during loading and unloading of
passengers or belongings. Be sure that all parking devices work properly.
Always use the wrist strap when pushing the vehicle to prevent it from rolling
away from you. Be sure that the parking devices are released before walking
or pulling.
It may be dangerous to leave the children unattended in or around the vehicle.
The cable tension can be tuned via the
----------
Brake adjusting screw
12
Publicité
