Hamilton Beach SC30 Manuel D'utilisation page 10

Probe Mode
8
Press Enter ( ). COOK will
display and 3 second beep will
sound.
NOTE: Unit will automatically
start in 20 seconds if Enter ( ) is
not pressed.
To monitor temperature after food is cooked:
1. Press OFF ( ) (if not already off); then press ON (I).
( )
2. Press Probe . Heat setting will be illuminated.
3. Press arrows to select WARM.
4. Press Enter ( ). WARM will display and 3-second beep will
sound.
NOTE: The unit will automatically start in 20 seconds if Enter ( ) is not
pressed. Display will alternate between WARM and actual temperature.
The unit will turn off and display OFF after a total of 14 hours.
10
(cont.)
9
Display will alternate between
actual temperature and the
temperature selected.
10
When selected temperature is
reached, the unit will switch to
Warm and display WARM
constantly.
11
The unit will turn off and display
OFF after a total of 14 hours.