Confi Guring Your Tv's Settings; Operating Settings Menu Items; Settings Menu Items; Using A Conditional Access Module - CONTINENTAL EDISON 94FHD905V Mode D'emploi

Sound Mode: You can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
AVL: Automatic Volume Limiting (AVL) function sets the
sound to obtain fi xed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Dynamic Bass: Dynamic Bass is used to increase
bass effect of the TV set.
Surround Mode: Surround mode can be change as
On or Off.
Digital Out: Sets digital out audio type.
Confi guring Your TV's Settings
Detailed settings can be configured to suit your
personal preferences.
Press "MENU" button and select Settings ikon by
using " " or " " button. Press OK button to view
Settings menu.

Operating Settings Menu Items

• Press " " or " " button to highlight a menu item.
• Press OK button to select an item.
• Press "MENU" button to exit.

Settings Menu Items

Conditional Access: Controls conditional access
modules when available.
Language: Confi gures language settings.
Parental: Confi gures parental settings.
Timers: Sets timers for selected programmes.
Date/Time: Sets date and time.
Sources: Enables or disables selected source
options.
Other Settings: Displays other setting options of
the TV set.
01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 21 01_MB61_[GB]_3902UK_IDTV_BRONZE16_37882W_10070171_50176794.indd 21
Using a Conditional Access
Module
IMPORTANT: Insert or remove the CI module only
when the TV is SWITCHED OFF.
• In order to watch certain digital channels, a
conditional access module (CAM) can be necessary.
This module must be inserted in the CI slot of your
TV.
• Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.
• Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the rear
side of the TV.
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
• When no module is inserted, "
Interface module detected" message appears on
the screen.
• Refer to the module instruction manual for details
of the settings.

Viewing Conditional Access Menu (*)

(*) These menu settings may change depending on
the service provider.
Press "MENU" button and select the icon by using
" " or " " button. Press OK button to view Settings
menu. Use " " or " " button to highlight Conditional
Access and press OK to view menu items.
English - 21 -
No Common
17.09.2010 18:45:15 17.09.2010 18:45:15