Publicité
is displayed as 0.00 (‰ or mg/L or % BAC - depending
on the setting). This is because other substances may
be present in the breath at low alcohol levels that could
influence the result of the breath sample.
Only the use of original ACE mouthpieces to
•
ensure the accuracy of the measurement results.
•
guarantee zero cross contamination.
•
secure the full device warranty.
Warning from ACE
Even if the device indicates an alcohol level in the „safe"
range, this does not mean that you can safely drive a vehicle
or carry out other activities that could be dangerous under
the influence of alcohol after consuming alcohol.
Switching the measuring units
After a test has been carried out, the breathalyzer displays
the result in per mille as standard. However, by briefly pres-
sing the power button, you can switch between different
measurement units, including BAC (blood alcohol concen-
tration in %) and mg/L (milligrams of alcohol per liter of bre-
ath). This allows you to display the measurement results in
the unit that suits you best or that is common in your region.
Warnings on the display
•
Warm Up: The appliance warms up. Please wait until this
process is complete.
•
Blow: The device is ready for use. Put on a mouthpiece
and blow for 3-4 seconds.
•
Analyzing: The test procedure is evaluated. The device
analyzes the sample.
•
Blow Error: The test was automatically interrupted.
Please start a new test and blow continuously for 3-4
seconds until the test ends with an audible and percep-
tible click-clack sound.
7
Publicité
