Operation; Power Off - Sharp Plasmacluster IG-A40U Mode D'emploi

OPERATION

Open the cover of the operation panel.
The operation cover is fi xed with a screw.
To open the cover, remove the rubber cover,
then the screw and washer.
Fix the cover of the operation panel.
If necessary, screw down the cover with the provided
screw and washer and replace the rubber cover.
(Please see Page E-7)
Press the operation button to select the preferred mode.
OPERATION BUTTON
AUTO RESTART
LOW
MED
HIGH
Power 'OFF'
If the AUTO RESTART switch is set to "ON"
and the unit is accidently unplugged, the
circuit breaker trips of there is a power failure,
the unit will automatically start operation at the
AUTO RESTART
previous setting after power is restored.
Switch
E-9
Operation
panel
Release high-density
Plasmacluster ions quietly.
Release high-density
Plasmacluster ions at medium fan
speed.
Fastest fan speed increases the
density of the Plasmacluster Ions.