Publicité
2
appliance description
1.
Freezer compartment
2.
Thermostat with interior light
3.
Glass shelves
4.
Glass shelf on vegetable drawer
5.
Vegetable drawer
6.
Bottle rack
7.
Door compartments
8.
Ice cube holder
9.
Egg tray
3
before the first use
Leave the appliance to stand for at least 3 hours before you insert the plug into the socket. Otherwise, you may damage the
compressor.
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the
packaging material. Keep the material (plastic, polystyrene and cardboard) out of reach of children. Check the appliance
after unpacking for any damage, possible from transportation. Place the appliance on a flat and stable surface.
The installation procedure is given in the Installation Instructions.
Clean the appliance thoroughly, especially in the interior, before use (see Cleaning & Maintenance).
The installation and electrical connection must be carried out by a qualified technician, in accordance with installation
instructions and local regulations.
The appliance must be connected with a properly installed fused socket. The power supply (AC) and voltage at the
operating point must correspond with the details on the rating label of the appliance. The rating label is located on the inside
left of the appliance.
When the product is plugged in for the first time, the interior lights may turn on 1 minute late due to opening tests.
There can be an odor when you first switch on the appliance. It will disappear after the appliance starts to cool.
First clean the interior of the appliance. Use warm water and a neutral detergent. After cleaning, rinse the interior with clean
water and rub dry. Leave the appliance to dry for 1 to 2 hours.
22
•
English
1
2
3
4
5
8
9
7
6
Publicité
