Setting Items And Their Options; Upconversion Setting; Clock Setting - Esoteric K-05Xs Mode D'emploi

Setting items and their options

Upconversion setting

UPC>***
o This setting can be made for each input .
o During Super Audio CD playback, the DSD signal is sent as is to
the D/A converter without being upconverted .
ORG (original)
The input signal is sent as is to the D/A converter without being
upconverted .
2Fs
32kHz, 44 . 1 kHz and 48kHz sources are upconverted to double val-
ues of 64 kHz, 88 . 2 kHz and 96 kHz, respectively, and then sent to
the D/A converter .
4Fs
32kHz, 44 .1kHz, 48kHz, 88 .2kHz and 96kHz sources are upcon-
verted to double or quadruple values of 128 kHz, 176 .4 kHz or
192 kHz and then sent to the D/A converter .
8Fs
32kHz, 44 .1kHz, 48kHz, 88 .2kHz, 96kHz, 176 .4kHz and 192kHz
sources are upconverted to double, quadruple or octuple values of
256 kHz, 352 . 8 kHz or 384 kHz and then sent to the D/A converter .
16Fs
32kHz, 44 . 1 kHz, 48kHz, 88 . 2 kHz, 96kHz, 176 . 4 kHz, 192kHz, 352 . 8 kHz
and 384kHz sources are upconverted 16, 8, 4 or 2 times to 512 kHz,
705 . 6 kHz or 768 kHz and then sent to the D/A converter .
DSD
The signal is converted to 22 . 5 MHz DSD digital format, and then
sent to the D/A converter .
Digital filter setting during DSD playback
DSDF>***
OFF
No digital filter is used .
ON
A digital filter is used .

Clock setting

CLK>***
OFF
Clock synchronization is not used .
SYNC
This unit's master clock is synchronized to the clock signal
(44 . 1 kHz, 48 kHz, 88 . 2 kHz, 96 kHz, 176 . 4 kHz, 192 kHz or 10 MHz)
input through the CLOCK IN connector and used for operation .
MCK
The 22 . 5 792MHz/24 . 5 76MHz signal input through the CLOCK IN
connector is used as the master clock .
25