Display Parts And Functions - Esoteric K-05Xs Mode D'emploi

Display parts and functions

a
Disc type
This shows the type of disc that is currently loaded .
SACD: Super Audio CD
CD: Audio CD
b
Information
During Super Audio CD playback
No indicator:
The two-channel area of a Super Audio CD is selected .
MULTI D-MIX:
This appears when the multichannel audio of a Super Audio
CD is being downmixed and output .
DSD DIRECT:
This appears when the two-channel area of a Super Audio CD
is selected and the DSDF (DSD filter) setting is OFF .
During CD playback and COAX, OPT or USB input
No indicator:
The upconversion function is not in use .
DSD DIRECT:
If DSDF (DSD filter) is set to OFF, this appears when a DSD
signal is input .
UPCONV:
The upconverter circuit will upconvert the signal before digi-
tal to analog conversion .
o The upconversion multiple is shown to the right of UPCONV
(page 25) .
UPCONV DSD:
The upconverter circuit will convert the PCM signal to a DSD
signal before digital to analog conversion .
c
Repeat indicator
This appears during repeat playback (page 19) .
a b c
SACD
MULTI D-MIX 1 CLK 4 4
1 0 : 2 9
r T
g
d
Clock mode
This shows the clock mode (page 25) .
e
Input clock frequency
The clock synchronization signal frequency input through the
CLOCK IN connector is abbreviated when shown .
For example, a 44 . 1 kHz frequency is shown as "44" .
f
Analog output setting
This shows the analog output (AOUT) setting (ESLA, XLR2, XLR3
or RCA) .
Nothing appears when set to OFF .
g
Message display area
The playback time and various messages appear here .
d e f
ESL A
No indicator: CLK set to OFF
CLK: CLK set to SYNC
MCK: CLK set to MCK
15