Milwaukee 49-16-2717 Manuel De L'utilisateur page 4

• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to filter out microscopic particles.
READ AND SAVE ALL
INSTRUCTIONS FOR
FUTURE USE
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Safety Alert Symbol
Read operator's manual
Always wear eye protection and
use proper personal protective
equipment.
Always wear protective clothing
and footwear.
Wear protective gloves
Minimum
Keep bystanders 50' away during use.
50' 15m
Objects may be thrown or ricochet in
all directions.
Do not use blades or brush cutting
wheels.
UL Listing for Canada and U.S.
FUNCTIONAL DESCRIPTION
1. Attachment pole
2. Detent
3. Trimmer head
4. Guard
8
7
SPECIFICATIONS
Cat. No. ................................................ 49-16-2717
Power Head ............................................... 2825-20
RPM .......................... High 0 - 6200
Trimmer Line ................................ 25' x 0.08" spiral
............................... 20' x 0.095" spiral
Replacement Line .........MILWAUKEE 49-16-2712
ASSEMBLY
Before use, read manual and labels
WARNING
of the power head. Important as-
sembly and use instructions are provided in the
power head manual. Connect the attachment to
the power head in accordance with the power
head manual.
Do not operate the tool without the guard in
place. The guard must be attached properly dur-
ing use. Operating the tool without the guard will
cause serious injury.
Installing the Guard
The guard is shipped uninstalled and must be in-
stalled before use.
1. WARNING! Remove
battery to avoid start-
ing the tool.
2. Line up the guard
bracket with the holes
in the guard.
3. Insert four screws
through the guard and
into the bracket.
4. Tighten the screws
securely using the
included key.
4
1
5. Line blade
6. Spool tab
7. Line
8. Spool housing
3
6
5
Low 0 - 4900
or MILWAUKEE 49-16-2713
2
4