Publicité
Sivoia QS Drapery System Installation Guide
7
Ripple Fold | Drapery Tape Assembly (without Pull-to-Start)
(CUSTOM) Sivoia Ripplefold Overlap Drapery Panel Fabrication Details
Extended Overlap-Closure Snap Spacing
The ripple fold drapery snap tape is attached to the top of the drapery panel by the drapery manufacturer. The total number of snaps
required for each drapery panel is based on the track width, draw type and fullness of the drapery. Center draw and tandem center draw
configurations require two drapery panels. The lutron ripple fold drapery system is compatible with Graber snap tape, which has a spacing of
4.25 in (108 mm).
A
B
B
Draw
Custom Snap Spacing
A = 0.75 in (19 mm)
B = 1.75 in (45 mm)
C = Standard ripple fold snap tape spacing of
4.25 in (108 mm)
D = 1.0 in (25 mm)
E = Varies with return distance
Edge Sew Detail
0.125 (3 mm)
Page 10
C
C
Male
Snaps
Top Edge of Fabric
Snap Tape
C
See Edge Sew
Detail
Drapery Panel
(Continued)
C
C
Male
Snaps
Return
D
E
Publicité
