Lutron Sivoia QS Guide D'installation

Sivoia QS Drapery System
Installation Guide—Please Read Before Installing
Important Notes - Please Read Before Installing
A. Lutron systems are intended for use with only Lutron hardware and
power supplies.
B. Codes: Install in accordance with all local and national electrical
codes.
C. Environment: Ambient operating temperature: 32 °F - 104 °F (0 °C
- 40 °C), 0 - 90% humidity, non-condensing. Indoor use only.
D. Plan the installation to maintain sufficient clearance between the
moving drapery and any object, including window hardware,
cranks, lock levers, and stationary drapery.
! CAUTION: RISK OF FALLING OBJECTS. Securely install the
shade system per the mounting instructions.
Failure to do so could result in minor or moderate injury.
Tools required:
• Tape measure
• Small flat-blade screwdriver
• #1 Phillips screwdriver
• #2 Phillips Screwdriver
System Components:
Drapery Track
Single-track, right-draw, pinch pleat system shown; dual systems will include additional track(s) and EDU(s)
Included with
wall-mount tracks:
Extendable
Wall-Mount
Bracket, Single*
Included with
ceiling-mount tracks:
Ceiling-Mount
Cam-Lock with Washer*
*Quantity varies with system width
Customer Assistance
USA and Canada: 1.844.LUTRON1 (588-7661) | UK: +44.(0)20.7702.0657 | lutron.com/help | support@lutron.com
For product warranty information, please see: lutron.com/TechnicalDocumentLibrary/Window Systems Warranty.pdf
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299, U.S.A.
• Power drill and drill bits
• Level
• Pliers
• 3/32 in hex key (included
w/recess-mount system)
Included with dual
wall-mount
tracks:
Extendable
Wall-Mount
Bracket, Dual*
Included with recess-mount tracks:
Recess-Mount
Bracket*
12/2023
P/N 045700 Rev. C
Contents
1
Wall Mount _________________________________ 2
2
Ceiling Mount ______________________________ 3
3
Recess Mount ______________________________ 4
4
Drive Installation ____________________________ 5
5
Pinch Pleat Fabric Installation ________________ 5
6
Ripple Fold Fabric Installation ________________ 7
7
Ripple Fold (without Pull-to-Start) _____________ 9
8
Ripple Fold (with Pull-to-Start) _______________ 11
9
Power-Up and Control Assignment ___________ 12
10
Setting Open and Close Limits ______________ 12
11
Optional Manual Open Feature______________ 13
O
Restoring Factory Default Settings ___________ 14
Terminal Block
#8 x 1½ in
Wood Screw*
English
Electronic Drive Unit (EDU)
EDU Models:
†
QSSC-EDU-D105 24-36 V- 41 W
QSSC-EDU-D105-P 24-36 V- 41 W
QSSC-EDU-D145 24-36 V- 40 W
QSSC-EDU-D175 24-36 V- 45 W
Page 1
†