Available accessories
5
Push M.C. right to display the detailed
list of the selected entry.
The phone number, name and genre (if as-
signed) of entries are displayed in the detailed
list.
# If several phone numbers are included in an
entry, select one by turning M.C.
# If you want to go back and select another
entry, push M.C. left.
6
Use M.C. to control the following func-
tions.
Perform the following procedures to set the
function.
Calling a number in the phone book
1 Press M.C. to make a call.
2 To end the call, push M.C. down.
Editing phone numbers
You can edit the numbers of Phone Book entries.
Each phone number can be up to 24 digits long.
1 Press and hold M.C. to display the number input
screen.
2 Push M.C. left or right to move the cursor to the
number you want to change.
3 Push M.C. up or down to change numbers.
4 Press M.C. to store the new number.
Clearing a phone book entry
1 Press and hold M.C. to display the number input
screen.
2 Turn M.C. to switch to the clear memory screen.
Edit number (number input screen)—Clear
memory (clear memory screen)
3 Push M.C. right to show a confirmation display.
Clear memory YES is displayed.
! If you do not want to clear the memory that
you have selected, push M.C. left. The display
reverts to normal.
4 Press M.C. to delete the Phone Book entry.
Cleared is displayed.
The Phone Book entry is deleted. The display re-
turns to Phone Book entry list.
Using the call history
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
The 12 most recent calls made (dialled), re-
ceived and missed, are stored in the call his-
tory. You can browse the call history and call
numbers from it.
1
Press
(list) to display the list.
Phone book—Missed call—Dialled call—Re-
ceived call
# If no phone numbers are stored in the se-
lected list, No data is displayed.
2
Turn M.C. to select a phone number.
Turning M.C. to change the phone numbers
stored in the list.
# If the phone number is already in the phone
book, the corresponding name is displayed.
# You can also change the phone number by
pushing M.C. up or down.
3
Push M.C. right to display the detailed
list.
Name and phone number are displayed in the
detailed list.
# If the number is already in the Phone Book
then the name is also displayed.
# Turning M.C. switches to the previous or next
phone number displayed in the detailed list.
4
Press M.C. to make a call.
# For an international call, press and hold M.C.
to add + to the phone number.
5
To end the call, push M.C. down.
HD Radioä tuner
You can use this unit to control an HD Radio
tuner (e.g. GEX-P20HD), which is sold sepa-
rately.
For details concerning operation, refer to the HD
Radio tuner's operation manual.
Section
03
25
En