Basic Operations; Storing And Recalling Stations; Switching The Display; Using Itunes Tagging - Pioneer DEH-P4200UB Mode D'emploi

Section
03 Available accessories

Basic Operations

1 Band indicator
2 5 (stereo) indicator
Appears when the selected frequency is being
broadcast in stereo.
3 LOC indicator
Appears when local seek tuning is on.
4 Preset number indicator
5 Signal level indicator
Shows the radio wave strength.
6 Frequency indicator
Selecting a band
1 Press BAND/ESC until the desired band (FM-1,
FM-2, FM-3 for FM or AM) is displayed.
Manual tuning (step by step)
1 Push M.C. left or right.
Seeking
1 Push and hold M.C. left or right.
You can cancel seek tuning by pushing M.C. left
or right.
While pushing and holding M.C. left or right, you
can skip stations. Seek tuning starts as soon as
you release M.C.

Storing and recalling stations

The operation is the same as that of the tuner.
(Refer to Storing and recalling stations on page
8.)

Switching the display

Desired information can be displayed while
tag information has been broadcasting.
26
En
Selecting the desired text information
1 Press DISP/
/SCRL.
Broadcast frequency/station name—broadcast
frequency/artist name—broadcast frequency/
song title—broadcast frequency/program type
Scrolling the text information to the left
1 Press and hold DISP/

Using iTunes tagging

This function can be operated with the following
iPod models.
— iPod 5th generation
— iPod nano 3rd generation
— iPod nano 4th generation
— iPod classic
— iPod classic 120GB
— iPod touch
— iPod touch 2nd generation
— iPhone
— iPhone 3G
However, tag information can be stored in this
unit even while the other iPod models are used.
It is possible to save the song's information
(tag) from broadcasting station to your iPod.
The songs will show up in a playlist called
"Tagged playlist" in iTunes the next time you
sync your iPod. Then you can directly buy the
songs you want from iTunes Music Store.
Storing the tag information to this unit
1 Tune in the broadcast station.
2 Press and hold M.C. if TAG is indicated in the dis-
play while desired song is broadcasting.
! While storing the tag data on this unit, TAG
flashes.
Storing the tagged information to your iPod
1 Connect the iPod to this unit and transfer this
unit's tag information to the iPod.
Advanced operations using
special buttons
Storing the tag information to this unit
1 Press
/TAG.
/SCRL.