Waste water pump
Large food remnants in the rinsing water not retained by the filters may block
Figure 18
the waste water pump. the rinsing water does not get pumped out and covers
the filters.
In this case:
• Disconnect the appliance from the power supply.
1
• Remove the filters.
• Scoop out standing water - use a sponge if necessary.
• Using a spoon, pry off the pump cover (see Figures 18-19) until it clicks,
then grip the cover and pull upward until it resists and then pull forward.
Figure 19
• Check inner compartment and remove any foreign objects.
• Place cover in the original position, press down and engage.
• Reinstall filters.
3
2
Click
Preparing your unit for vacation
Before leaving for vacation during warmer weather, besides turning off the main valve, also turn off water supply
at the nearest point to the dishwasher. During colder weather, please follow the instructions for winterizing your
unit below.
Winterizing your unit
If your dishwasher will be unused for an extended period of time in a location that experiences freezing temper-
atures (holiday home or through a vacation period), have your dishwasher winterized by an authorized profession-
al service.
16