Publicité
Specific instructions for installation and use of this model
Please examine these specific complementary instructions carefully in addition to the general instructions also delivered with the appliance
Characteristics and performance in intermittent running conditions, per EN 13240:
Nominal power
Yield
CO released %
"Flamme verte" environmental
performance rating
Expelled dust concentration at 13% O
Fume exhaust temperature
Recommended fuel
Fume output rate by weight
Floor protection:
The appliance must not be placed directly on a floor made of or containing combustible or heat-susceptible
materials. Where possible, sit the appliance at the centre of a concrete plinth size 100cm x 100cm x 45mm
thick covered by a metal plate with an upward-facing reflective surface (stainless steel or gloss-ceramic
coated).
Minimum distance to maintain between the stove and any nearby combustible materials: 55cm
If the adjacent walls are made from incombustible materials that are not susceptible to degradation under
heat (with wall temperatures up to 200°C), this clearance can be reduced to 15cm.
Physical characteristics
Appliance weight
Firebox
Connection to fume duct or flue through outlet
ring on top of appliance
Overall size
Door size
Door glass size
Manufacturer's plate
XD le 07/12/2021
SEDAN S stove
135
443
height 627mm
≤ 25 mg/Nm
2
Wood in 25 cm logs
Max. log length: 30 cm
500
84kg
With post combustion system
Diameters: external 150mm; internal 5 inches
width 500mm
height 422.5mm
height 282mm
Engraved under the ash pan
Reference: P9450/ver1.1
5 kW
78 %
0.07 %
3
281°C
5.4 g/s
depth 443mm
width 414mm
width 332 mm
Page 11 of 18
Publicité
