Scantronic 8136 Manuel D'installation page 66

6. Exemples de programmation
Utiliser : Pour :
Use: To:
Menu 31 Not used.
Menu 32 Assign zone types.
Assign zone attributes.
Allocate zones to Areas.
Menu 35 Create Partitions
Allocate Areas to Partitions
Menu 41 Allocate Areas to Level
keys A, B, C or D.
Menu 42 Set Level exit mode.
Set Level exit time.
Menu 43 Set Level entry time.
Menu 44 Level Flexi-zone
Menu 45 Set Level Alarm response.
Menu 46 Set Level rearm response.
Menu 47 Allocate Keypad entry/exit
tones to Levels
Allocate Keypads to Paritions
Enable/disable keys 1 & 3
(PA).
Enable/disable keys 7 & 9
(Control).
Menu 51 Assign output types
Bell, Strobe, etc.
Menu 53 Set Bell Delay and Run
Time
Menu 65 Select Reset type
Menu 67 Select 4 or 6 digit access
codes
Return to Day Mode and select User Information.
58
Notes :
Notes:
System can have up to 4 Partitions.
No Area can belong to more than
one Partition.
Flexi zones can be FE, ER, NA or NU.
Only six Flexi-zones per Level.
Full,Local or Internal.
Never, Once, Twice, or Three Times.
Customer, Installer, or Anticode
(plus RedCare in UK)
496633 version 1