Scantronic 8136 Manuel D'installation page 63

Utiliser : Pour :
Use: To:
Menu 31 Not used.
Menu 32 Assign zone types.
Assign zone attributes.
Allocate zones to Areas.
Menu 41 Allocate Areas to Level
keys A, B, C or D.
Menu 42 Set Level exit mode.
Set Level exit time.
Menu 43 Set Level entry time.
Menu 44 Allocate Flexi-Zones.
Menu 45 Set Level Alarm response.
Menu 46 Set Level rearm response.
Menu 47 Allocate Keypad
entry/exit tones to Levels.
Enable/disable keys 1 & 3
(PA).
Enable/disable keys 7 & 9
(Control).
Menu 51 Assign output types
Bell, Strobe, etc.
Menu 53 Set Bell Delay and Run
Time
Menu 65 Select Reset type
Menu 67 Select 4 or 6 digit access
codes
Return to Day mode and select User Information
6. Exemples de programmation
Notes :
Notes:
Zone descriptions if required, but not
necessary to domestic application.
Full,Local or Internal.
Never, Once, Twice, or Three Times.
Customer, Installer, or Anticode
(plus RedCare in UK)
496633 version 1 55