Important - Black+Decker DUSTBUSTER DB1440SV Mode D'emploi

MAINTENANCE
Use only mild soap and damp cloth to clean
the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into
a liquid.

IMPORTANT:

To assure product
SAFETY and RELIABILITY, repairs,
maintenance and adjustment (other than
those listed in this manual) should be
performed by authorized service centers or
other qualified service personnel, always
using identical replacement parts.
ACCESSORIES
WARNING:
any accessory not recommended for use
with this tool could be hazardous.
Recommended accessories for use with
your tool are available from your local dealer
or authorized service center. If you need
assistance regarding accessories, please
call: 1-800-544-6986.
BATTERY REMOVAL AND
DISPOSAL
This product uses NiMH rechargeable and
recyclable batteries. When the batteries
no longer hold a charge, they should be
removed from the Vac and recycled. They
must not be incinerated or composted.
The batteries can be taken for disposal to
a BLACK+DECKER, Company-Owned or
Authorized Service Center. Some local
retailers are also participating in a national
recycling program (see "RBRC
Call your local retailer for details. If you
bring the batteries to a BLACK+DECKER
Company-Owned or Authorized Service
Center, the Center will arrange to recycle
old batteries. Or, contact your local
municipality for proper disposal instructions
in your city/town.
To remove the battery pack for disposal:
1.) First, before attempting to
disassemble the product, turn it on and
leave it on until the motor completely
stops insuring a complete discharge of
the batteries.
2.) Using a phillips screwdriver, remove
the screws on the underbelly of the hand
vac the secure the battery housing.
3.) Lift the housing cover away from
the assembly, exposing the batteries.
4.) Lift out the battery assembly and
detach the lead connection.
5.) Dispose of batteries as per
recommended guidelines.
ENGLISH
The RBRC™ Seal
The RBRC™ (Rechargeable
Battery Recycling Corporation)
Seal on the battery (or battery
pack) indicates that the costs to recycle
the battery (or battery pack) at the end
of its useful life have already been paid
by BLACK+DECKER. In some areas, it
is illegal to place spent batteries in the
trash or municipal solid waste stream
and the RBRC program provides an
environmentally conscious alternative.
RBRC in cooperation with
BLACK+DECKER and other battery
users, has established programs in the
United States and Canada to facilitate
The use of
the collection of spent batteries. Help
protect our environment and conserve
natural resources by returning the spent
battery to an authorized BLACK+DECKER
service center or to your local retailer
for recycling. You may also contact your
local recycling center for information on
where to drop off the spent battery, or call
1-800-8-BATTERY.
NOTE: Batteries are integrated into
the tool and should not be removed. To
recycle, return the tool to an authorized
BLACK+DECKER service center.
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
Seal").
TM
and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving
• Increase the separation between the
• Connect the equipment into an outlet on
• Consult the dealer or an experienced
Changes or modifications to this unit not
expressly approved by the party responsible
16
antenna.
equipment and receiver.
a circuit different from that to which the
receiver is connected.
radio/TV technician for help.