Publicité
3
Operation
3.4 Warnings before first use
• When the appliance is in operation, and the removable cooking tray is pulled out, hot steam
will be released from the air outlet and the top of the basket. Therefore, be cautious to avoid
burning yourself with the hot steam.
• When using the cooking trays at high temperatures, be careful to avoid direct contact.
3.5 Operation
• While the device is plugged in or cooking, pressing and holding the lock symbol for ''
seconds activates the device's child lock, and the lock symbol ''
• If the child lock is active other buttons on the screen will not work. Press and hold the lock
symbol for ''
3.5.1 Chamber separator attachment installed (both cooking trays are being used)
3.5.2 Chamber separator attachment is not installed.
Remove the cooking tray and place it on a flat surface. Remove the chamber separator attachment
from its place. Next, attach the cooking tray to the appliance and follow the steps outlined in the "3.5.3
Selecting and starting a program" section.
3.5.3 Selecting and starting a program
If you want to switch to another program after starting the appliance, press and hold the
"Start/Stop" key or the " Select Tray " key for 3 seconds. Then select the desired program by
selecting the tray again.
• The display shows the automatically set temperatures and times according to the selected
cooking functions. You can change these temperatures and times as desired.
• To cancel the cooking process, press and hold the "Start/Stop" key or the "Select chamber"
key for 3 seconds. The cooking program you have selected will be cancelled.
Less Oil Cooker / Instructions for use
The best browning and cooking is usually achieved on the cooking rack.
It is recommended to use the cooking rack for all recipes and roasts,
unless the use of another accessory is recommended.
'' 3 seconds to turn off the child lock.
Remove the cooking tray and place it on a flat surface. Insert the chamber sep-
arator attachment into the slots on the cooking tray. Next, attach the cooking
tray to the appliance and follow the steps outlined in the "3.5.3 Selecting and
starting a program" section.
''3
'' lights up in red.
11 / EN
Publicité
