Publicité
INFORMATION
Time.Info
CurrentTime: Display of usage time (in hours) since the last power-up
TotalTime: Display of the usage time (in hours) since the first power-up.
LastTime: Display of the usage time (in hours) since the last reset.
Time PIN: To access the reset of usage times you must enter a PIN code:
050 to reset the «CurrentTime»
ClearLast: ON / OFF to reset
Temp.Info - temperature display
Head: xxx F or C - Head temperature display
Base: xxx F or C - Base temperature display
Fan Speed - Fan speed display
Head 1 : xxx RPM
Base 1 : xxx RPM
Error.Info - Display of the last 10 error messages.
Model.Info - Model name display: Baracca 360 WET
Software.V - Display of the version of the various processors
1U - Vx.x.x
2U - Vx.x.x
3U - Vx.x.x
TEST
Reset Motors
ALL: Reset of all motors
Pan & Tilt: Reset of Pan and Tilt motors
Head: Reset of all head motors
Test.Channel
Submenu allowing to test all the Baracca 360 parameters such as:
Pan, Pan Fine, Tilt, Tilt Fine, CMY, Color, Gobo, Fixed Gobos, Prism1, Prism1Rot, Prism2,
Prism2Rot , Focus, Frost, Strobe, Dimmer, Dim Fine, DimMode, P/T Speed.
Panel.Ctrl.
Sub-menu allowing manual adjustment of all Baracca 360 parameters such as:
Pan, Pan Fine, Tilt, Tilt Fine, CMY, Color, Gobo, Fixed Gobos, Prism1, Prism1Rot, Prism2, Prism-
2Rot , Focus, Frost, Strobe, Dimmer, Dim Fine, DimMode, P/T Speed.
Calibrate :
Sub-menu allowing to recalibrate the motors as well as the Baracca 360's focus preset parameters.
To access this menu you must enter the PIN code for unlocking this function.
Code Pin : 050
This gives you access to the various parameters:
Pan, Tilt, CMY, Color, Gobo, Focus, Prism1, Prism1Rot, Prism2, Prism2Rot , Focus, Frost
Page 41
Publicité
