Publicité
SET MENU
Address set:
Baracca 360 WET DMX address configuration
User Mode:
Selection of the Baracca 360 WET DMX mode between the different modes such as:
- Standard 8B - 23 DMX channels
- Standard 16B - 28 DMX channels
- CK Extended 8B - 28 DMX channels
- CK Extended 16B - 32 DMX channels
FUNCTION MENU
Status
In this submenu it is possible to modify the Baracca 360 WET behavior.
No DMX Mode
Modification of Baracca 360 WET behavior during DMX signal loss:
- Hold: maintenance of the last DMX values received
- Auto: The Baracca 360 WET goes into Auto mode
- Black Out: Baracca 360 WET goes into "Stand By" mode
P Reverse: ON /
OFF
T Reverse: ON /
OFF
PAN degree: 630 ° Or 540 ° - Selection of the maximum angle of PAN
Feedback:
ON
/ OFF - Activation or Deactivation of feedback motors
Move Speed: Selection of movement speed between 1 and 4
1
- faster to 4 - slower
Hibernation: OFF - 01 Min to 99 Min - Selection of hibernation Baracca 360 WET mode
. OFF by default or from 1 minute to 99 minutes before switching to hibernation mode.
Fixture ID
Sub-menu allowing modification of the DMX universe of reception (ArtNet and sACN) as well the IP
address and subnet mask of the Baracca 360 WET.
- Universe: 0-255 - Selection of the receiving DMX universe
- UnitIPAddr: xxx.xxx.xxx.xxx - Baracca 360 WET IP address selection
- MaskAddr: xxx.xxx.xxx.xxx - Baracca 360 WET subnet mask selection
Protocol Set
Submenu for selecting the Baracca 360 WET network protocol:
ArtNet (default) or sACN
Net Switch
Sub-menu allowing the activation or deactivation of the Ethernet switch of the Baracca 360 WET.
Dim Mode
Sub-menu allowing the selection of Baracca 360 WET dimmer mode between Standard (default),
Stage, TV, Architectural and Theater. A descent time is automatically applied to the dimmer in
stage, TV, Architectural and theater modes .
Page 38
- Pan inversion
- Tilt inversion
Publicité
