Technical Information; Installation Considerations - Hansgrohe AXOR Starck 10755 1 Série Instructions De Montage / Mode D'emploi / Garantie
Masquer les pouces
Voir aussi pour AXOR Starck 10755 1 Série:
Table des Matières
Publicité
Tools Required / Outiles Utiles /
Herramientas Útiles
27 mm
24 mm
17 mm
3 mm
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
•
For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
•
Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
•
This trim is for use with rough valve model
10754181 (not included).
•
To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher
than 10°F. In Massachusetts, the maximum out-
put temperature can be no higher than 11° F.
•
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
10° - 140° F*
176°F*
14.5 GPM
Publicité
Table des Matières
