FujiFilm SonoSite X-Porte Guide De L'utilisateur page 6

3 Tap Doppler to begin imaging.
Position and adjust the D-line and gate. Refer to the SonoSite X-Porte User Guide.
4 Tap Start or Update to display the spectral trace.
Note
5 Tap Simultaneous. When Simultaneous is available, the control is highlighted.
Simultaneous
If this control is hidden, tapping More Controls displays it.
Note
6 The image now scans simultaneously in 2D/PW Doppler, or 2D, Color, and PW Doppler.
7 Tap More Controls to display and adjust specific controls for each of the three modes.
Note
To view frames in the cine buffer in simultaneous Doppler
1 Freeze the image.
2 Do either of the following:
Drag the slider. Right moves forward, and left moves backward.
While the slider bar represents the complete set of collected imaging data, the scrolling display shows
only one cycle of imaging data at a time. The green CINE marker (
scrolling display, which corresponds in time to the displayed image.
Tap
or
Tapping these controls moves the green CINE marker (
and its corresponding image.
Note
4
Tapping Update toggles the display of 2D, Color, and Doppler controls and
calculations.
The Simultaneous control can only be found in the Doppler controls.
Full screen display is unavailable in simultaneous Doppler mode.
to move forward or backward through frames one at a time.
You can customize an exam type to display the Simultaneous control button by
default. Refer to the SonoSite X-Porte User Guide for instructions on how to
customize exams.
) indicates a single column on the
), showing a column on the scrolling display
Simultaneous Doppler imaging