FujiFilm SonoSite X-Porte Guide De L'utilisateur page 7

Acoustic output
Guidelines for reducing MI and TI
Refer to the tables in this section of the SonoSite X-Porte User Guide.
Output display
Table 2: TI or MI ≥ 1.0
Transducer Model
HFL38xp
HSL25xp
L25xp
L38xp
Even if MI is less than 1.0, the system provides a continuous real-time display of MI in all imaging modes, in
increments of 0.1.
The system meets the output display standard for TI and provides a continuous real-time display of TI in all imaging
modes, in increments of 0.1.
The TI consists of three user-selectable indices, and only one of these is displayed at any one time. In order to
display TI properly and meet the ALARA principle, the user selects an appropriate TI based on the specific exam
being performed. FUJIFILM SonoSite provides a copy of
guidance on determining which TI is appropriate (see
Transducer surface temperature rise
Refer to the tables in this section of the SonoSite X-Porte User Guide.
Acoustic output
Index
MI
TIC, TIB, or TIS
MI
TIC, TIB, or TIS
MI
TIC, TIB, or TIS
MI
TIC, TIB, or TIS
"Related guidance documents"
2D + PW Doppler
No
Yes
Yes
No
Yes
No
Yes
Yes
AIUM Medical Ultrasound Safety
2D + Color + PW
Doppler
Yes
Yes
Yes
No
Yes
No
Yes
Yes
, which contains
on page 14).
5