Cleaning And Maintenance - Hkoenig V6 Manuel D'utilisation

Replacement of filter
Method: SIide water tank out from base unit, take the filter out from water tank, and then replace
with a new one. After new filter has been installed well into water tank, fill water into water tank to
Max fill level, and then slide water tank back into base unit. (Immerse filter in water for several
minutes in order to gain better performance in future use.
Anti-calc system
1.
The filter is designed to reduce the buildup of limescale which occurs during steam ironing,
this will prolong the working life of your iron. However, please note that the filter will not
completely stop the natural process of limescales build-up.
2. The filter should be replaced with a new one after two - three months. Before replace, the filter
can still be used continuously. However, limescales may be most probably built up in steam
chamber, This happens always depending on your local water quality. 1 t is proposed that replace
filter as soon as possible or mix your water with 50% proportion of distilled water.
Emptying and storing
1. Disconnect the appliance from the power supply and allow the appliance to cool down for 60
minutes at least.
2.
After use, siide out the water tank and pour out all the remaining water.
3. Wind the power cord around cord storage of the base unit.
4. The iron should be place on the iron rest plate and they can store together.

Cleaning and Maintenance

Unplug the appliance tram the main supply and let
1.
the iron cool down.
Clean the iron with a damp cloth.
2.
Wipe off scale and any other deposits on the soleplate
3.
with a damp cloth or non-abrasive (liquid) cleaner.
Never clean the appliance under the tap water.