Hkoenig V6 Manuel D'utilisation page 14

Problems Possible causes
Incorrect connection to
Iron won,t heat
the main socket
Handle has not been laid
down
Temp setting at "
position
Unknown malfunctions
Temp
No steam go
NYLON position
out when
pressing
steam switch
No water in water tank
after the
desired
Filter has not been well
temperature
installed into water tank.
is reached.
Water tank has not been
well installed.
" <!> "
blink
quickly,other Defects with internai
fabric indicator
circuit, unit corne into
turn off, buzzer
self protect mode
sound a "Bi".Ali
buttons are non-
workin. it will
resume when
re-energized
again.
Never dispose of your product with other household waste. Please inform yourself about
the local rules on the separate collection of electrical and electronic products. The correct
disposai of your old product helps prevent potentially negative consequences on the
environment and human health.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05
Trouble shooting
Re-plug the unit to main socket.
Lay handle down
Select
<!> "
temperature according to fabric
setting chart.
Take to a qualified serviceman or
manufacturer or its service agent
for examination and repair.
setting at Select
temperature according to fabric
setting chart.
Fill water into water tank
lnstall filter into water tank
SIide water tank into the power
base and it will be locked in place
until a "click" sound produced.
Re-energized the unit again.
If
resume,please take it to its
service agent or similarly
qualified persans for repair.
Solution
the required ironing
the required ironing
it still can not