Hkoenig V6 Manuel D'utilisation page 3

Do not operate the appliance with a damaged cord or
9.
if the appliance has been dropped or damaged. To
avoid a hazard such as the risk of electric shock, do
not disassemble the appliance, it must be taken to a
qualified serviceman or manufacturer or its service
agent for examination and repair. Incorrect re-
assembly can cause a risk of electric shock when the
iron is used.
Place the iron out of reach of children; close
10.
supervision is necessary for any appliance being
used by or near children. Do not leave the iron
unattended while connected to the supply mains.
During use, always place its stand on a stable, level
11.
and horizontal surface or ironing board.
Always place the iron on its stand, and do not allow
12.
the hot soleplate touch power cord or supply hose.
Burns can occur from touching hot metal parts, hot
13.
water or steam. Use caution when using the
appliance.
Never use the iron facing towards people
14.
because the steam can cause burns.
Never twist the supply hose during use.
15.
The appliance must be used and rested on a
16.
stable, level and horizontal surface.
The iron shall be placed on the separate stand
17.
only. When placing the iron on its stand, ensure that
the surface on which the stand is placed is stable.
The iron is not to be used if it has been dropped, if
19.
there are visible signs of damage or if it is leaking.
The iron must not be left unattended while it is
20.
connected to the supply mains.
The appliance must be rest or stocked on a stable,
21.