Napoleon TQ285 Instructions D'installation page 10

EN
Step 1.
• Ensure the propane regulator is disconnected from the gas
supply. Disconnect the propane regulator hose from the brass
fitting by holding the brass fitting while loosening the hose
fitting with a wrench.
Step 2.
• Hand tighten the female end of the RV Conversion hose to the
brass fitting on the end of the manifold flex hose. Tighten using
two wrenches. Take care not to twist or damage flex hose.
www.napoleon.com
1 2
Step 3.
• Plug the male end of the RV
Conversion hose into the RV
quick connect.
• Immediately complete a LEAK
TEST as per the instructions
included in this manual.
10
N415-0327 NOV 24.21