Publicité
7
troubleshooting
FAULTCODE
DESCRIPTION
Inadequate water supply
F5
Water supply is not stopping.
F3
The waste water can not be
discharged.
F2
The water temperature is not
F8
correct. Heating defect.
Safety is activated against water
F1
overflow.
FE
Faulty electronics.
F7
Overheating error.
F9
Position of the distributor error.
F6
Faulty heat sensor.
40
•
English
CHECK
• Check whether the tap is fully open and there is nothing blocking
the water mains.
• Close the tap, remove the input hose and check whether it is
clogged.
• Start the dishwasher again. Contact the service department of
Inventum when the error remains.
• Close the tap.
• Contact the service department of Inventum.
• The water discharge hose is clogged.
• The filters might be clogged.
• Turn the dishwasher off. Reset the dishwasher's program and check
the filters and the discharge hose. Restart the dishwasher.
• Contact the service department of Inventum when the error
remains.
• Contact the service department of Inventum.
• Turn off the dishwasher and close the tap.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
Publicité
