Publicité
INSTRUCTIONS FOR USE
Fig. 1
Fig. 4
1. Unfold the foot spa by pulling up the edge one side at a time while holding the base
firmly (Fig. 1–3).
2. Use the anti-collapse system to lock the unit. To do this, pull out the metal props at
the front and back of the foot spa and push them into place under the edge of the
tub (Fig. 4–5).
3. Ensure that the unit is unplugged before filling with water. Fill with warm water to
the MAX fill line, located on the inside of the tub.
NOTE: Heatkeep™ technology will only help to maintain the temperature of water
placed inside the foot spa. It will not heat cold water. For a warm water massage, fill
the unit with warm water.
4. Place the unit on the floor in front of a chair. It is recommended to place the product
on a towel.
5. Plug the unit into a 120V AC power supply.
6. Sit down and place your feet in the tub.
7. To operate the unit, press the power button on the back of the product.
NOTE: The Heatkeep™ technology is automatically activated when the bubble
massage is switched on.
Fig. 2
Fig. 5
Fig. 3
4
Publicité
