Télécharger Imprimer la page

Beurer HS 15 Mode D'emploi page 14

Publicité

• Have the device checked by an authorised specialist workshop before using it again. Dan-
ger to life due to electric shock!
• If the device has been dropped or su ered any other damage, it must no longer be used.
Risk of electric shock and risk of injury!
• If there is visible damage to the device, mains cable/plug or accessories. If you have any
doubts, do not use the device and contact your retailer or the specified Customer Services
address. Risk of electric shock!
• Keep packaging material away from children – risk of su ocation!
• Do not use extension cables in the bathroom to ensure the mains plug can be accessed
quickly in an emergency.
Warning
To avoid damage to health, please note the following:
• Ensure that no highly flammable liquids are located near the device. Risk of fire!
• Place the device on fireproof surfaces only. Risk of fire!
• The hair straightener must not be covered – risk of fire!
• Do not use the device on synthetic hair – risk of fire!
Notes
• Remove all packaging material before using the device.
• Only connect the device to a socket that has the voltage shown on the type plate.
• Only pull the mains cable from the socket by the mains plug.
• Do not use any additional parts that are not recommended by the manufacturer or o ered
as accessories.
• Under no circumstances should you open or repair the device yourself, as faultless functio-
nality can no longer be guaranteed thereafter. Failure to comply will invalidate the warranty.
• In the event of a fault or damage, have the device repaired by a certified specialist workshop.
• Never leave the device unattended during use.
• Do not use the device outside.
• If you pass the device on to someone else, make sure to also pass on these instructions for use.
5. OPERATION
Warning
• Position yourself on a dry, non-conductive surface. Risk of electric shock!
• Ensure that your hands are dry. Risk of electric shock!
• Your hair must be dry! Risk of electric shock!
• The device can become very hot depending on the temperature setting and the duration of
use. When the device is hot, it must only be held using the handle – risk of burns and fire!
• Do not touch the hot plates [1]. Risk of burns!
• Do not clamp objects between the hot plates [1].
• Switch the device o immediately if it is faulty or not working properly.
14

Publicité

loading