Publicité
(Click)
1. Insert Wand into Floor Nozzle.
(Snap)
3. Snap the Onboard Storage Clip onto the
wand, then place accessories in the holder.
Ensure all connections click securely into place.
s h a r kc l e a n . c o m
ASSEMBLY
(Click)
2. Insert Handheld Vacuum into wand.
4. For compact storage, hang the handheld
vacuum from the Storage Hook on the wand.
CONTROLS
The control panel is located on top of
the handheld vacuum.
BARE FLOOR SETTING
Slide the floor select button to setting
I to clean bare floors and small area
rugs. The brushroll spins slowly in
this setting.
NOTE: Press the floor select button to toggle between Bare Floor and Carpet settings.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use the Carpet setting.
NOTE: Select Carpet for stuck-on dust and debris.
SETTINGS
POWER BUTTON
Power Button
Press the Power button to begin
vacuuming. Press again to turn off power.
CARPET SETTING
Slide the floor select button to setting
II to clean carpets. In this setting, the
brushroll spins faster to pick up debris
below the surface of your carpets.
s h a r kc l e a n . c o m
Publicité
