Publicité
Colour and brightness settings
♦
Adjust the colours and brightness as required by clicking on the
"Color/Brightness adjustment" button (K). A settings window
appears.
♦
Move the "Brightness" slider to set the brightness between
0 and 255.
♦
Move the three "Color Balance" sliders to set the RGB values
between 0 and 255.
♦
To reset to the default values, click on the "Default" button.
♦
To accept the new values and close the settings window, click
on the "Exit" button.
After use
♦
Remove the negative holder
through the device.
♦
Remove the slide magazine
slot
on the right.
4
♦
Remove the USB cable
and the scanner.
│
GB │ IE │ NI
■
16
All manuals and user guides at all-guides.com
5
6
from the USB port on your computer
8
by pushing it all the way
by pulling it back out of the
SND 3600 C2
Publicité
