Publicité
Installation Procedure
SES ECU Preparation and Installation
1.
Clean the area indicated on the topside of the Glove
Box Inner Cover.
2.
Attach the Double-Sided tape to the Glove Box
Inner Cover as shown.
• Clean attachment surface using isopropyl alcohol and
cleaning towel.
• To achieve maximum bond strength of Tape, the
attachment surface temperature must be between
68°F-110°F (20°C-43°C) upon application.
• Verify that the Double-sided tape is firmly attached.
3.
Attach the Foam Tape to the SES ECU as shown.
• Clean attachment surface using isopropyl alcohol and
cleaning towel.
- 6 -
Publicité
