Publicité
ALREADY INSTALLED
23. Bundle up the Hood Switch Sub-Harness and
connectors to the Vehicle Harness and secure
using 2 Tie Wraps.
• Route the Sub-harness so that it is clear from the
opening range of the Air Cleaner Box cover.
24. Finish reassembling the Vehicle.
• Verify that panels fit together properly, with no
uneven gaps.
• Verify that all Connectors are plugged in.
• Tighten the DS Knee Airbag Nuts to 7.5 N·m
(0.76 kgf·m, 5.5 ft-lb)
- 16 -
Publicité
