Publicité
7.
Once Registration is complete, Look for the
hazard lights to flash once and horn sound once
simultaneously.
• If not, ID registration has failed. Please see Check A
in Troubleshooting. (page 24)
8.
Close the Hood.
9.
Look for the hazard lights to flash once and horn
sound once simultaneously.
• If not, please see Check B in Troubleshooting.
(page 25)
10. Disconnect the 1P SES Diagnostic Connectors.
11. Switch the "ENGINE START STOP" Button to OFF.
- 19 -
Publicité
