SAFETY PRECAUTIONS
A WARNING | —
Observe the fallowing instructions to
prevent fires and personal injury.
® When the Power supply lead, Memory
backup lead or Ground lead are
extended, use
a 5 mm? (AWG 5) or
larger automotive grade cable which
will withstand friction and heat to safe
guard against fires occurring as a
result of short-circuiting.
e Make sure that metal objects,
particularly needles or coins do not
get into the unit to prevent short-
circuiting and fires.
e if smoke comes out of the unit or a
Strange smell is present, disconnect
the unit immediately and consult your
KENWOOD
dealer. Continued use
under these circumstances could
cause a fire, as well as damage the
unit permanently.
e. Do not touch the unit during use
because the surface of the unit
becomes hot and may cause burns if
touched,
À CAUTION
Heed the following instructions to keep
the unit in proper working order.
e The unit should be connected to a
12 V DC power supply with a minus
ground connection.
e Do not open enclosures, such as the
front panel, top or bottom covers.
@ Do not place the unit, where it will be
exposed to direct sunlight or near
heating devices.
e Do not expose the unit to water.
e Do not place the unit in areas of
excessive dust, high humidity or on
unstable surfaces.
e To keep good ventilation, do not
anything on top of the unit.