Publicité
E SYSTEM
EXAMPLE
e 2 wav speaker svstem
e Use 4 ohm speakers.
e 6dB/oct. slope
e
Full range speaker:
Crossover
Frequency
100 Hz or more
@ Woofer:
100 Hz or less
From the table on the previous
page, the coil anc capacitors
required for the above system are
as follows:
100 Hz
e Capacitors for
Frequency
full-range speakers
: 400 pF
(Withstand voltage: 50 V or more)
e Coil for woofer
: 6.4 mH
(Current capacity: 5 A or more)
Responce
Full renge
speakers
KAC-723
À CAUTION
è Be sure that the combined impedance of your speaker system as seen from the
KAC-723 is at least
2 ohms. An impedance of less than 2 ohms will damage the
amplifier.
Publicité
