Télécharger Imprimer la page

Elica Fusaro 30 Instructions D'installation page 6

Masquer les pouces Voir aussi pour Fusaro 30:

Publicité

7" (17.8 cm) Round Vent System
Vent Piece
45° elbow
90° elbow
7" (17.8 cm)
PLAN THE INSTALLATION:
Recommended mounting height is 18" to 24" from the bottom of
the range hood to the top of the cooking surface.
The hood should be mounted to the bottom of a standard wall
cabinet. If the hood must be mounted directly to a wall, secure the
hood to wall studs.
All wiring must comply with local codes and the unit must be
properly grounded. The hood is connected to a 110 - 120 VAC
lighting circuit (15 Amp) in the circuit breaker or fuse box.
The model ESN130 is non-ducted
The model EFS130 is ducted
The models ERS230, ENM230 and ENM236 are convertible (they
may be installed as a ducted or as a non-ducted unit).
Round
2.5 ft
(0.8 m)
5.0 ft
(1.5 m)
0.0 ft
(0.0 m)
Before installing the hood
Example Vent System
3 " x 10"
(8.3 x 25.4 cm)
elbow
2 ft
(0.6 m)
Maximum Recommended Length = 50 ft (15.2 m)
1 - 90° elbow
8 ft (2.4 m) straight
1 - wall cap
Length of 3¹⁄
" x 10"
4
(8.3 cm x 25.4 cm) system
IF THE RANGE HOOD IS TO BE NON - DUCTED:
Purchase Accesories Recirculation (non ducted) kit
ERS230: ERSRCK30
ENM230 / ENM236: ENMRCK36
IF THE RANGE HOOD IS TO BE DUCTED:
Ductwork can be installed vertically or horizontally.
Duct runs should be as short as possible.
Avoid the use of elbows.
Use duct tape at all joints.
Do not use duct smaller than the discharge on the hood.
For 7" round ductwork installation, purchase accessory
transition Kit:
7" (17.8 cm) round vent mounting plate.
Accesories Part No. EXXTRK07 (purchased separately).
7" (17.8 cm) round damper Non return valve.
Accesorie Part No. EXXNRVRD (purchased separately).
For 3¹⁄
" x 10" (8.3 x 25.4 cm) rectangular ductwork
4
installation:
3¹⁄
" x 10" (8.3 x 25.4 cm) rectangular vent conector is
4
supplied.
If needed purchase 3¹⁄
rectangular damper non return valve. Accessories
Part No. EXXNRVRT
6
6 ft (1.8 m)
Wall cap
= 5.0 ft (1.5 m)
= 8.0 ft (0.0 m)
= 0.0 ft (2.4 m)
= 13.0 ft (3.9 m)
" x 10" (8.3 x 25.4 cm)
4

Publicité

loading