Publicité
Action
Inspect the tightness of the bolts
and nuts
Check the conditions of cutting
attachments and guard
Perform frequent maintenance works when the equipment is used in dusty areas.
These items should be serviced by the service dealer unless you have the appropriate tools and mechanical knowledge.
Question/Problem - Cause
Cause
Low performance:
• The battery is discharged;
• Trigger contacts are not in good condition or it does
not work;
The
motor
makes
intermittently or runs slowly:
• The trigger contacts are damaged;
• Mechanical parts are blocked;
• The brush cutter is running over excessive pressure,
overloaded motor;
Brush cutter overheats:
• Overloaded appliance;
• Poor assembly of the housing or pieces inside the
brush cutter;
1st month
or 20 hours
an
abnormal
sound,
Every 3 months
or 50 hours
Solution
• Charge it;
• Repair or replace the trigger;
starts
• Repair or replace the trigger;
• Inspect the mechanical parts;
• Reduce the pressure applied;
• Reduce the pressure applied;
• Check if there is any blockage;
Every 6 months
Every year or
or 100 hours
300 hours
Publicité
