Publicité
Always wear resistant shoes with non-slip sole that
completely covers the foot. Never work barefoot or in
sandals, for example.
In case of nausea, headaches, sight problems (e.g.
reduced vision), hearing problems, dizziness and
reduced ability to concentrate, stop working immediately.
Plan rest breaks when using the cordless split brush cutter
and avoid using it for long periods. Permanent vibrations
are harmful to health.
Do not attempt to remove the wrapped material from the
cutting attachments and respective guards while the motor
is running or the blade is rotating. Stop the motor, remove
the batteries and wait for the cutting attachments to stop
before removing material wrapped around the blade shaft
or mowing head.
Operating the power tool causes a massive load of
vibrations may damage nervous and circulatory
systems, especially to whom have circulatory disorders.
Inform your doctor if any symptoms arise caused by the
vibrations. Among these symptoms, that occur specially on
fingers, hand and wrists, are also included loss of
sensation, pain, muscle weakness, skin discoloration or
tingling sensation.
The control and safety devices installed must not be
removed or inhibited.
When carrying out any cleaning, adjustment, repairing or
maintenance tasks, wear gloves and place the cordless
brush cutter in a firm and steady surface.
Frequently check the equipment, especially before storage
(for example, before the winter period), regarding wear and
damages.
For safety reasons, replace worn or damaged parts
immediately so the appliance is always in perfect operating
conditions.
Cleaning:
The power tool must be thoroughly cleaned after each use.
Do not use aggressive cleaning products. These products
may damage plastics and metals, compromising the safe
operation of the power tool.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out all other works must be
performed by an official distributor.
Only use attachments, oil or grease authorized by VITO. Not
doing so may result in personal injuries or damages to the
cordless brush cutter. If in doubt, you should contact an
official distributor.
Keep warning and information stickers always clean and
legible.
Keep all nuts and bolts well tightened in order to ensure a
safe operation.
If any components or safety devices are removed for
maintenance
works,
immediately and correctly.
Clean the equipment thoroughly before storage, especially
in winter. Store the brush cutter in an operating condition.
Make sure the appliance is protected against misuse (for
example, by children).
Your cordless split-shaft brush cutter should only be
serviced by the manufacturer's internal service personnel,
or other qualified personnel, replacing any necessary parts
with original parts.
they
must
be
repositioned
Publicité
