Publicité
THINGS TO CHECK BEFORE INSTALLATION
•
Does the output (kW) match the volume (ft³/m³) of the sauna room?
See Table 1-2.
•
In case there are any uninsulated brick, tile or glass walls in the sauna
room, an additional volume of 53 ft³ (1.5 m³) should be added to the
sauna room for each such square meter of the wall.
•
The suitable output of the heater will be determined based on that
volume according to Table 1-2.
•
The producer's warranty guarantee is invalid if the heater and sauna
room have been dimensioned incorrectly!
•
Minimal safe distances between the sauna room's ceiling and walls to
consider in installing the electric heater are listed in
Table 3.
INSTALLATION
Positioning the heater
•
The heater must be positioned in such a way that there is a safe
distance between fl ammable materials and the heater.
•
The heater must be installed in a way that prevents people from having
physical contact with the heater or that dangerous situations could
emerge during the heating process.
•
The heater holds approximately 595 lb (270 kg) of stones.
•
The inputs of the power cable are on the bott om cover of the heater.
X
A
Screw down the legs (4 pcs) included in the package. Adjust the legs of the
heater so that all four are equally supported and the heater is level.
4
Y
3
6 X 90
B
A
A
Max. 15.7"/400 mm
Min. 47.3"/1200 mm
A
50 mm
2"
H
Publicité
