Publicité
Install Instruction
Doors reversal
Based on the location where you plan to
use your refrigerator, you may find it more
convenient to reverse the position of the
door.
ATTENTION
To avoid injury to yourself or your property, we
recommend that someone assist you during the
door reversal process.
You will need: A standard screwdriver, a
Phillips screwdriver.
Make sure that your refrigerator is
>
unplugged and empty.
Have someone available to assist you in
>
the process.
Keep all of the parts you remove to reuse
>
them later.
Parts already mounted on the door (as
shipped):
Top hinge assembly H
ole cover
bottom hinge
adjustable foot
1. Power off the refrigerator, and remove all
objects from the door trays.
2. Take off top hinge cover, top hinge ,the
sleeve pipe of freezer door and hole cap
on the other side.
hole cap
middle hinge
stopper
hinge cover
top hinge
sleeve pipe
3. Take off freezer chamber door middle
hinge, the sleeve pipe of refrigerating
door and hole caps on the other side.
sleeve pipe
hole caps
4. Remove the refrigerating door remove the
bottom hinge and adjustable foot on the
other side.
5. Assemble the bottom hinge assembly and
adjustable foot on other side.
adjustable foot
6. Assemble the stopper of the refrigerating
door on the other side.
7. Put the refrigerating door on bottom
hinge , assemble the middle hinge , hole
caps and the sleeve pipe of refrigerating
door.
7
middle hinge
bottom hinge
EN
Publicité
