6
EN
INSTALL INSTRUCTION
Before first use
Remove the exterior and interior packing,
wipe the outside thoroughly with a soft dry
cloth and the inside with a wet, lukewarm
cloth.
Avoid placing the cabinet in a narrow recess
or near any heat source, direct sunlight, or
moisture.
Let air circulate freely around the cabinet.
When installing the unit, ensure that 10 cm of
free space is left at both sides, 10 cm at the
top of the unit and not more than 7.5 cm at
the rear of the unit.
Before connecting your refrigerator to
the power supply, check that the voltage
stated on the rating label of your appliance
corresponds to the voltage in your home.
A di erent voltage could damage the
appliance.
The appliance must be grounded. The
manufacturer is not responsible for damages
that may occur as a result of usage without
grounding.
Space requirement diagram
B
A
A
550
1590
Notice: All dimensions in mm
C
E
135 °
D
B
C
D
550
902
Connecting the appliance
After installing the product, please let it stay
for more than 2 hours before turning on the
power, otherwise it will lead to a decrease
in cooling capacity or a damage to the
product.
Allow the appliance to run empty for 2-3
hours(4 hours in summer when the ambient
temperature is high), so the compartment
can cool to the appropriate temperature.
CAUTION
The refrigerator should always be plugged into
its own individual electrical outlet which has a
voltage rating that matches the rating plate.
When positioning the appliance, ensure the supply
cord is not trapped ordamaged.
Ambient Temperature
Depending on the climate class, this
refrigerator is intended to be used at an
ambient temperature range as specified in
the following table.
The product may not operate properly at
B
temperatures outside of the specific range.
You can find the climate class on the product
label.
Climate Class
SN
N
ST
T
If you have any doubts regarding installation, please
turn to the vendor, to our customer service or to the
nearest Authorised Service Centre.
ATTENTION
The cooling performance and power consumption
E
of the refrigerator may be a ected by the ambient
temperature, the door-opening frequency, and
1052
the location of the refrigerator. We recommend
adjusting the temperature settings as appropriate.
Install Instruction
2 h
Ambient Temperature
+10 °C to +32 °C
+16 °C to +32 °C
+16 °C to +38 °C
+16 °C to +43 °C