Publicité
Operation Instructions
OPERATION INSTRUCTIONS
use and functions
Functions
ATTENTION
The actual control panel may differ from model to model.
Display
Once initially powered on, all LED lights turn on for 2 seconds, and then the refrigerator runs at
the default setting (LED3 light is on).
In case of no failures, it shows the actual temperature setting of refrigerator.
In case of a failure, the corresponding LED blinks.
The fault code display will disappear after 30min. if you need to re-display the fault code, please
disconnect the power supply and then power it back on.
Fault Code
LED1 / LED3 flashing
LED1 / LED2 / LED4 flashing
Temperature setting
Each time the temperature setting button A is pressed once, the temperature setting changes
one time. After the temperature setting has been completed, the refrigerator will run according
to the set value after 30s.
The shift regulation is:
1
LED 1
2
LED 2
3
LED 3
4
LED 4
A
Temperature setting of refrigerator
A
compartment
Fault Description
Ambient temperature sensor fault
Refrigerating defrost sensor fault
11
EN
Publicité
